Check my setup
The help for this page of the Version 2 transmitter, as its latest update shows it.
On the transmitter: Model setupRotorflightGuide & checksCheck my setup
Reads the flight controller and lists what is unfinished or odd. Nothing is changed.
RED: it stops the model arming. The flight controller's own reasons: no RPM signal for the governor, the level never calibrated, a restart owed, no ESC signal chosen ... and the arm switch: there must be one, on this model's arming channel, its zone above 988 us (safety on: not armed) and reaching 2012 us (safety off: armed).
AMBER: worth a look. No battery capacity (no % left in flight); no battery voltage; the black box 80% full or more;
a gear ratio missing or backwards; rescue on with no switch to start it; the model tilted more than 45 degrees.
GREEN: nothing found.
The button on a row opens the page that puts it right. Its OK brings you back here, and the check runs again.
'Restart' restarts the flight controller (after a question).
'Check again' reads it all again.
Still stuck?
See common questions, or write to mmessiter@gmail.com. Say which page, and what the screen showed.