LockDownRadioControl

A free, open-source radio control system you can build yourself

Beeper and name

The help for this page of the Version 2 transmitter, as its latest update shows it.

On the transmitter: Model setupRotorflightBeeper & name

Rotorflight's beeper and its name for the model.
For every bank. 16 MB screens only.

The Beeper & name page: the name in Rotorflight, RAW 420 MCM; a switch for each buzzer beep, from Power on to the Beeper switch; and the motor beeps (DShot): the Beeper switch, Link lost and the tone
The page as the transmitter shows it. Tap to enlarge.

Name in Rotorflight

Touch it to type a new one (up to 16 letters). It is what the Rotorflight app and the backups call this model. It does not change the transmitter's own model name.

Buzzer beeps

Only if a buzzer is fitted to the flight controller.
Each switch on = it beeps for that event:
Power on, Arming, Disarming, Armed with the motor stopped, Link lost, Battery low, Battery very low, and the Beeper switch (a switch set to 'Beeper on (BEEPER)' on the 'Switches & knobs' page).

Motor beeps (DShot)

The motor itself beeps: a model lost in long grass can be heard. It works only with a DShot ESC signal (see 'First-time basics'), and never while armed.
The Beeper switch: flick that switch to make the motor beep.
Link lost: the motor beeps when the flight controller loses the receiver's signal.
Tone (1 - 5): the pitch of the beep. 1 is the default.

'Save' writes the page to the flight controller, stores it and reads it back to check.
'Save' is refused while the model could be armed.
'OK' goes back to the 'Rotorflight' page. With unsaved changes it asks 'Save now?'.
With no model connected the page shows the model's backup.

Still stuck?

See common questions, or write to mmessiter@gmail.com. Say which page, and what the screen showed.

↑